Loading…
Drainage pump 0.18 kW, Hmax 7 m, Qmax 133 L/min AQUATICA (773320). Pumps of this series are equipped with a float switch and can be used for: pumping clean water, supplying water from open reservoirs, pumping water from basements, cellars, wells, tanks, low-pressure irrigation and watering systems. Pump part: Housing: cast iron/stainless steel AISI 304; Motor shaft: stainless steel AISI 304; Impeller: cast iron; Discharge outlet: technopolymer; The float switch provides automatic on/off of pumps of this series depending on the water level. Motor type: asynchronous, enclosed with built-in thermal protection in the winding; Voltage: 220-240 V; Frequency: 50 Hz; Insulation class: B; Protection class: IP68. Cable length: 5.3 m; Flow rate: 133 L/min; Head: 7 m. Operating conditions: Maximum pumped liquid temperature: +40 °C; Immersion depth below water level: up to 5 m; Only for clean water without abrasive or corrosive impurities (sand, clay, lime, etc.); Water pH: 6.5 - 8.5; Total water mineralization: no more than 1500 g/m³; Warranty period: 18 months.