Loading…
Water supply stations are equipped with a 24-liter expansion tank. The pressure switch controls the operation of the electric pump - pressure switch settings P(on) 1.4 bar / P(off) 2.8 bar. The stations are designed for pumping clean water and can be used for: domestic water supply, auxiliary equipment, lifting water in high and low pressure pipelines, irrigation systems for gardens, vegetable gardens, greenhouses and hotbeds. Installation must be carried out in places protected from weather and moisture. Body: stainless steel AISI 304; Impeller: technopolymer; Motor shaft: stainless steel AISI 304; Expansion tank: painted steel; Automation: pressure switch; Pressure gauge included. Electric motor: Motor type: asynchronous, closed, air-cooled, with built-in thermal protection in the winding; Bearing: rolling (C&U); Stator windings: copper; Voltage: 220-240 V; Frequency: 50 Hz; Insulation class: F; Protection class: IPX4; Cable length: 1 m. Technical data: Power, W - 900 W; Maximum head, m - 48; Maximum flow rate, l/min - 85; Motor shaft Stainless steel - AISI 304; Cable length, m - 1; Suction port diameter,